0102030405
CMM Trigger and Scanning Probe: Top-Quality Solutions from China's Leading Suppliers and Factory
PROBE & ACCESSORY
Manual Probe
- Enhanced inspection capability from adjustable probe orientation with 168 repeatable index positions set at 15° increments.
- Repeatable TP20 stylus module changing in each pre-qualified position without the need for re-qualification significantly enhances productivity.
- TP20 compatibility, providing a wide range of force and length options to optimise machine performance and access capability.
- Easy to read scales allow rapid re-orientation.
Auto Probe
- Total angular movement
- Around A axis (Horizontal axis): Range: 0°～105°, Min. step: 7.5°
- Around B axis (Vertical axis): Range: ±180°, Min. step: 7.5°
- Total number of positions: 720
- Max. output torque: 0.45Nm
- Max. permissible length of the probe extension: 300 mm
- Weight: 645g
- Autojoint mount, repeatable probe positioning.
- Rapid automatic probe interchange via ACR1 or ACR3.
- Full multi-wire capability (designed by the M on PH10M).
- 720 repeatable positions at 7.5° increments.
- Torque capable of lifting 300mm (11.81 in) extension bar.
- Suitable for a wide range of CMMs using shank or quill mounting.
- I++ DME communication, wide selection of metrology software.
- No requirement to modify existing programs in the majority of cases.
- Allows re-use of existing equipment.
- Rotation angles: A axis -115°～115°; B axis ∞.
- The world’s most compact and versatile scanning probe system.
- A scanning probe, and a touch trigger probe using TP20 stylus modules.
- Rapid and repeatable interchange between highly modular system elements provides the most efficient solution to suit the measurement task.
- Excellent scanning accuracy across entire stylus range of 20~200mm (0.78~7.87 in).
- Isolation optical metrology technology gives unrivalled measurement performance.
- Probe can be mounted on an articulating head, allowing access to many features with fewer styli.
- Fast measurement speed.
- The system has high precision.
- Strong flexibility.
- Axial extension of up to 800 mm from the base rotation center.
- Multi-type sensor probe and stylus exchange capability.
- Detachable probe system with low-cost exchange frame for increased system flexibility.
Laser scanning probe
CONTROLLER & ACCESSORY
108 PIECES FIXTURE
Frequently Asked Questions
Q1: What is the advantage of using a manual probe with repeatable index positions?
A manual probe with repeatable index positions (such as 168 positions set at 15° increments) allows you to change TP20 stylus modules without needing re-qualification. This significantly boosts productivity and maintains measurement consistency.
Q2: What are the angular movement capabilities of the Auto Probe?
The Auto Probe features a total of 720 positions with angular movement around the A-axis (horizontal) ranging from 0° to 105° and around the B-axis (vertical) ranging within ±180°, both adjustable at minimum steps of 7.5°.
Q3: Can these CMM probe heads be integrated with existing metrology software?
Yes, they support I++ DME communication, which makes them compatible with a wide selection of industry-standard metrology software. In most cases, there is no requirement to modify your existing measurement programs.
Q4: What makes the scanning probe system highly efficient?
The scanning probe system is compact and versatile, supporting both scanning and touch-trigger options (using TP20 modules). It delivers excellent accuracy across a 20-200mm stylus range and utilizes isolation optical metrology for unmatched measurement performance.
Q5: What is the maximum extension range supported by the probe systems?
Depending on the system configuration, the probe systems can handle axial extensions of up to 800 mm from the base rotation center, or torque capable of lifting a 300mm extension bar, facilitating access to deep workpiece features.